Attention should be paid to the use of hydraulic fittings

2020-05-14 14:37:22

As an indispensable part of related equipment, the function of hydraulic fittings cannot be ignored. It is very important to determine the filter efficiency reasonably. Among them, the performance requirements of the filter and the use of the prefilter should be reasonable, while the maintenance is very simple and efficient.

In the operation of hydraulic filter, the area is increased to filter, so there are more dust or debris to be cleaned, the working efficiency is also improved, and the service life in this area is also better maintained. Moreover, the filtration area is large, the air velocity through the material is low, and the filtration resistance is small. In this way, some dust will be blocked and better protected during operation.

In the operation of the hydraulic filter, relevant details shall be paid attention to, and the corresponding parts shall not be added specially, or corresponding measures shall be taken in the design of the filter, such as changing the height of the air inlet or adding mesh at the air inlet, etc. If the measures are not correct, change the filter frequently in the relevant season.

It is necessary to do a good job in cleaning the hydraulic parts in use, but this aspect is still difficult to control. If you are not particularly confident, don't operate them easily and don't clean them. The premise is that there are professionals who can clean them, otherwise, the essence has not changed.